Solderable Polyester

Insulation Characteristics: 

Modified Polyester-imide is produced by insulating the conductor with a single coat of a solder-strippable modified polyester resin. Physical properties are adequate for most coil applications. More severe winding requirements such as in-slot stator windings are not recommended without thorough evaluation. This film may be readily stripped from the conductor by immersing in an 850° - 950°F solder pot; care must be exercised in preventing the film from over-cutting due to poor immersion techniques.

General Applications: 

Modified Polyester-imide is designed for those special coil applications where solderability is coupled with a need for high thermal resistance. It is not recommended for in-slot motor windings or applications subject to high winding stresses.

• Automotive coils
• Electronic coils
• Shaded pole motor coils
• Special transformer coils